SNO - PM Leader - Tech 3

Location Andover, Massachusetts, United States of America Category Manufacturing and Quality Assurance Job Id R000116406 Job Type Full time Experienced Professionals Starting Pay / Salary Range $39.08 - $42.70 / hour

Apply Now
JOB DESCRIPTION

Job Location

Andover

Job Description

Business Purpose for Role

The role of the Line PM Leader is to implement, maintain, and continuously improve the Maintenance Work Planning & Scheduling, Breakdown Elimination, and Defect Handling DMS for their line or area, and to provide a continuity link to other PM systems. The PM Leader is a member of the site PM Pillar Team.  As the PM Leader, you are responsible for ensuring the efficient execution of Maintenance Systems for your line or area.  Your other primary objective is to reduce stops in your area as well as build team capability and deliver superior quality safely through IWS tools and methodologies. This role is critical to deliver reductions in maintenance cost, standardization of maintenance procedures, and prevention of future failures.

Responsibilities and Scope of Role

  • Reduced # of breakdowns due to improper maintenance procedures.
  • Through the updating of standards & procedures, maintenance costs (parts & labor) are reduced and in line with budget or on glide path.
  • Equipment performance is controlled and predictable, due to percent increase of planned maintenance work (=> 90% planned work is the goal).
  • Plan & Schedule Maintenance Work
  • Review and prioritize notifications within 24 hours of generation.
  • The work order backlog is current, sorted for reporting and is managed to best meet the CBN.
  • Maintenance work is planned using “SIMPTWW”.
  • A job plan archive is maintained.
  • Lead the review of the previous job completion results, other maintenance activities and today’s plan in the Daily Meeting.  Plans should be adjusted accordingly based upon scheduled work, scheduled work completion and break in work.
  • Lead the scheduling of maintenance work for the next week during the Weekly Planning Meeting.
  • Ensure the revision and updating of “Maintenance Technical Documentation” occurs as necessary.
  • Develop and update annual maintenance plan.
  • Analyze failures to Eliminate Repeat Breakdowns
  • Completes PM Cards.
  • Completes Dice Charts for failures in department.
  • Can initiate planned and scheduled inspections to prevent like failures and facilitate correction of any found defects.
  • Follows site standards for in-depth failure analysis.
  • Establish the team necessary to complete failure analysis when required.
    Effectively compare failed part against new part to identify all phenomenon
  • Establishes Basic and Usage Condition for components.
  • Detail and execute an improvement plan as an output of the failure analysis process.
  • Standardizes the Results of the failure analysis and improvement activity by generating changes to AM CIL’s, Maintenance Standards, Maintenance Procedures, Maintenance Inspections, and Spares Inventory.
  • Communicates results and teaches improvements/standards via OPL and Kaizen Case Study.
  • Track and Report Maintenance Indicator Results and In Process Measures
  • Maintenance indicator results & in process measures is tracked and kept current.
  • At a minimum, key (critical few) results and in process measures
  • Activities or the lack there of, which drive maintenance indicator results in the wrong direction are corrected or brought to the attention of the appropriate resource.
  • Results of maintenance indicators and in process measures are used to assess the progress of The DMS’s and to determine equipment reliability.  Results are shared with the department leadership in the weekly meeting.

·Develop Improvement Plans

  • Improvements are identified through the tracking of PM Indicators & In Process Measures.
  • Losses are identified and “Improvement Themes” developed to eliminate losses.
  • Improvement Theme action plans are owned, developed, and tracked by the maintenance planner. 

·Champion and Lead the Continuous Improvement Process

  • Ensures all equipment design change proposals (corrective maintenance), Add/Delete/Modify work follows the Change Management Procedures.
  • All work executed is critiqued and work plans updated or revised as necessary.
  • Maintenance Technical Documentation and equipment drawings and schematics are complete, accurate, easy to find and easy to use.
  • Develops a relationship with the store room in order to ensure part identification accuracy, identify obsolete parts, off quality parts, ideal in stock numbers, required delivery time of parts, etc.
  • Updates to engineering drawings and standards are fed back to owner.
  • There is a clear link to Engineering Drawing Control and a Maintenance Technical Documentation Owner is established.
  • Actively coaches team members on IWS methodologies (finding and fixing defects, eliminating breakdowns to root cause, generating PM01’s, PM03’s, and notifications, etc.)

Job Qualifications

Skills and Capabilities Required to Successfully Perform Role (may be developed while in role)

  • Strong organizational and technical skills
  • Priority setting
  • Communication / Training Skills
  • AM Overview Training
  • PM Steps 1, 2, 3 and 4
  • Maintenance Planning & Scheduling Workshop
  • Breakdown Elimination Workshop
  • SAP Maintenance and Store room skills
  • Basic PC Skills
  • Knowledge of AM and PM Standards

Priorities and Approximate Allocation of Time
80% of time on the floor -- Coaching and building capability within the operating area        

20% building technical capability -- Analyzing losses, determining gaps, and executing action plan items

Pre-Requisites/Prior Qualifications Required

  • Self Starter – Must be able to understand Leadership intent & vision
  • Leadership capability & ability to communicate effectively with teams
  • 5-10 years experience in planning and execution maintenance job in relevant manufacturing and/or warehousing industry  
  • Experienced with mechanical skills execute maintenance activities in operations/warehousing.
  • Past experience in planning maintenance activities 

Job Schedule

Full time

Job Number

R000116406

Job Segmentation

Experienced Professionals (Job Segmentation)

Starting Pay / Salary Range

$39.08 - $42.70 / hour
Apply Now

Get notified for similar jobs

You'll receive updates once a week

Success! Successfully subscribed for similar jobs Failure! You have already subscribed for this job Failure! Failed to subscribed for similar jobs

Get tailored job recommendations based on your interests.

Similar Jobs

  • Operating/Technical Department Leader

    Location Mehoopany, Pennsylvania, United States of America Category Manufacturing and Quality Assurance Job Id R000124759 Job Type Full time Experienced Professionals Starting Pay / Salary Range: $105,000.00 - $156,200.00 / year

    Demonstrates leadership skills such as: directing a group in an organized manner through the resolution of problems, staying calm in emergencies, developing and executing plans, data-based decision...

  • Line Leader, Manager

    Location Shippensburg, Pennsylvania, United States of America Category Manufacturing and Quality Assurance Job Id R000122711 Job Type Full time Recent Grads/Entry Level Starting Pay / Salary Range: $85,000.00 - $115,000.00 / year

    Our Manufacturing Engineer Line/Area Managers help us get things done! Manufacturing Engineer Line/Area Managers are responsible for the results of their area and building long term capability in thei...

  • Manufacturing & Engineering Technical Manager 2025

    Location Belleville, Ontario, Canada Category Manufacturing and Quality Assurance Job Id R000115244 Job Type Full time Recent Grads/Entry Level Starting Pay / Salary Range: $0.01 / year

    Raw materials manager who coordinates with our suppliers for the production processes. Technical manager of various manufacturing equipment, processes, and projects. Prior work experience in a manufac...

  • Precision Grinder

    Location Boston, Massachusetts, United States of America Category Manufacturing and Quality Assurance Job Id R000108218 Job Type Full time Plant Technicians Starting Pay / Salary Range: $25.00 - $55.00 / hour

    Position cutting tools onto holding fixtures of machine and grind parts to meet quality specifications. Performing routine maintenance of equipment ensuring that equipment is in good working order and...

  • MTO Business Operations Specialist

    Location Boston, Massachusetts, United States of America Category Manufacturing and Quality Assurance Job Id R000123704 Job Type Full time Plant Technicians Starting Pay / Salary Range: $30.00 - $40.00 / hour

    Create Purchase Orders and enter goods receipts for items that will be logged into Vendor Managed Inventory Systems. Create Purchase Orders for yearly contracts and one time purchases, deliver goods,...

  • Quality – Microbiology Laboratory Technician - Tech 2

    Location ANDOVER, Massachusetts, United States of America Category Manufacturing and Quality Assurance Job Id R000125083 Job Type Full time Experienced Professionals Starting Pay / Salary Range: $33.50 - $39.05 / hour

    Problem solving ability: demonstrate ability to utilize technical knowledge and lab experience to identify problems in a timely manner. Ability to Plan and Organize Work: good time management and prio...

  • Electrical & Instrumentation Technician

    Location Boston, Massachusetts, United States of America Category Manufacturing and Quality Assurance Job Id R000118231 Job Type Full time Plant Technicians Starting Pay / Salary Range: $43.61 - $46.44 / hour

    The Electrical & Instrumentation Technician is responsible for enabling production throughput, reducing equipment downtime, troubleshooting issues, eliminating defects, and building technical mastery....

  • Site Electrician (ESO)

    Location Boston, Massachusetts, United States of America Category Manufacturing and Quality Assurance Job Id R000115982 Job Type Full time Plant Technicians Starting Pay / Salary Range: $51.10 - $58.67 / hour

    This role is responsible for being the electrical systems owner for the site, which involves maintaining the Plant’s Electrical Safety Program for electrical power systems at the site, from the utilit...

  • Mold & Die Technician

    Location Boston, Massachusetts, United States of America Category Manufacturing and Quality Assurance Job Id R000116578 Job Type Full time Plant Technicians Starting Pay / Salary Range: $37.24 - $40.20 / hour

    You will do various types of work including set-up and operation of multiple CNC and lathe machines, using GD&T blueprints/ 3D solid models, loading, inspecting, and running tooling and programs to a...

No recommendations found

Jobseekers Also Viewed

No recommendations found